Part Number Hot Search : 
S104S1L LANF7236 TE215 24S12 X931906 BB17897 PBYR2045 A1211
Product Description
Full Text Search
 

To Download PNZ108F Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Phototransistors
PNZ107F, PNZ108F (PN107F, PN108F)
Silicon NPN Phototransistors
PNZ107F
Unit : mm
o4.60.15 Glass window
For optical control systems Features
Flat window design which is suited to optical systems Wide directional sensitivity for easy use Fast response : tr = 8 s (typ.) Signal mixing capability using base pin (PNZ108F) TO-18 standard type package
4.50.2 12.7 min.
2-o0.450.05
2.540.25
1. 0 0 .2 5
45
0 0
.1
3
1.
21
Absolute Maximum Ratings (Ta = 25C)
Parameter Collector to emitter voltage Collector to base voltage Emitter to collector voltage Emitter to base voltage Collector current Collector power dissipation Operating ambient temperature Storage temperature
*
o5.75 max.
Symbol VCEO VCBO
*
Ratings 20 30 3 5 30 150 -25 to +85 -30 to +100
Unit V V V V mA mW C C
4.50.2
1: Emitter 2: Collector
PNZ108F
o4.60.15
Unit : mm
Glass window
VECO VEBO* IC PC Topr Tstg
12.7 min.
3-o0.450.05
PNZ108F only
1.
2.540.25
0 0 .2
5
45
0 0
.1
3
1.
3 21 1: Emitter 2: Base 3: Collector
o5.75 max.
Note) The part numbers in the parenthesis show conventional part number.
1
PNZ107F, PNZ108F
Phototransistors
Electro-Optical Characteristics (Ta = 25C)
Parameter Dark current Collector photo current Peak sensitivity wavelength Acceptance half angle Rise time Fall time Collector saturation voltage
*1 *2
Symbol ICEO ICE(L) P tr*2 tf*2 VCE(sat) VCE = 10V
Conditions VCE = 10V, L = 100 lx*1 VCE = 10V Measured from the optical axis to the half power point VCC = 10V, ICE(L) = 5mA RL = 100 ICE(L) = 1mA, L = 1000 lx*1
min 0.4
typ 0.05 900 40 8 9 0.3
max 2 4
Unit A mA nm deg. s s
0.6
V
Measurements were made using a tungsten lamp (color temperature T = 2856K) as a light source. Switching time measurement circuit
Sig.IN VCC (Input pulse) Sig.OUT (Output pulse) 90% 10% td tr tf td : Delay time tr : Rise time (Time required for the collector photo current to increase from 10% to 90% of its final value) tf : Fall time (Time required for the collector photo current to decrease from 90% to 10% of its initial value)
;;; ; ;;
50
RL
PC -- Ta
200 12
ICE(L) -- VCE
10 2
ICE(L) -- L
ICE(L) (mA)
VCE = 10V Ta = 25C T = 2856K
PC (mW)
ICE(L) (mA)
160
10
Ta = 25C 1000 lx T = 2856K 900 lx L= 800 lx 700 lx 1500 lx 600 lx 500 lx 400 lx
10
Collector power dissipation
8
Collector photo current
Collector photo current
120
6
1
300 lx
80
4
200 lx
10 -1
40
2
100 lx 50 lx 10 lx 24
0 - 20
0
20
40
60
80
100
0
0
4
8
12
16
20
10 -2
1
10
10 2
10 3
Ambient temperature Ta (C )
Collector to emitter voltage VCE (V)
Illuminance L (lx)
2
Phototransistors
PNZ107F, PNZ108F
ICEO -- Ta
10 2 VCE = 10V 10
ICE(L) -- Ta
ICE(L) (mA)
VCE = 10V L = 100 lx T = 2856K 100
Spectral sensitivity characteristics
VCE = 10V Ta = 25C
10
ICEO (A)
Collector photo current
Dark current
1
10 -1
Relative sensitivity
1
S (%)
10 -1 - 40
80
60
40
10 -2
20
10 -3 - 20
0
20
40
60
80
100
0
40
80
120
0 200
400
600
800
1000
1200
Ambient temperature
Ta (C )
Ambient temperature
Ta (C )
Wavelength (nm)
Directivity characteristics
0 100 90 80 70 60 50 40 30 20 10 20 10 4
tr -- ICE(L)
VCC = 10V Ta = 25C 10 4
tf -- ICE(L)
VCC = 10V Ta = 25C
S (%)
30
10 3
10 3
Relative sensitivity
tr (s)
40 50 60 70 80 90
10 2 RL = 1k 10 500 100 1
tf (s)
10 2 RL = 1k 10 500 100 1
Rise time
10 -1 10 -2
Fall time
10 2
10 -1
1
10
10 -1 10 -2
10 -1
1
10
10 2
Collector photo current
ICE(L) (mA)
Collector photo current
ICE(L) (mA)
3
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR


▲Up To Search▲   

 
Price & Availability of PNZ108F

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X